More Information

Submitted: 08 November 2019 | Approved: 25 November 2019 | Published: 26 November 2019

How to cite this article: Mathur P, Singh A. Recent approach to incorporate tellurium in metal carbonyl cluster utilizing extrusion reaction. Ann Adv Chem. 2019; 3: 014-016.

DOI: 10.29328/journal.aac.1001020

Copyright License: © 2019 Mathur P, et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

 FullText PDF

Recent approach to incorporate tellurium in metal carbonyl cluster utilizing extrusion reaction

Pradeep Mathur* and Ajeet Singh*

Discipline of Chemistry, School of Basic Sciences, Indian Institute of Technology Indore, Simrol-453552, India

*Address for Correspondence: Ajeet Singh, Discipline of Chemistry, School of Basic Sciences, Indian Institute of Technology Indore, Simrol-453552, India, Tel: +91-9584417969; Email: [email protected]; [email protected]

The incorporation of tellurium into metal carbonyl using tellurium transfer/ extrusion reaction is presented in this work. The results bring one of the new ways to incorporate tellurium by transferring it from one molecule to another molecule, in comparison to the work so far where either insertion or extrusion reactions were shown. The reactions of PhC2TeC2Ph with the metal carbonyl cluster produced thermodynamically stable metal carbonyl tellurium clusters.

Tellurium based compounds can be formed or modified by two types of reactions which are insertion and extrusion reactions [1]. With reference to the tellurium based reactions, the chemical reactions where tellurium, connected to two other atoms A and B, is lost to form an A-B bonded molecule are the extrusion reactions as shown in equation 1.

ATeB  Te AB          eq. 1 MathType@MTEF@5@5@+=feaaguart1ev2aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLnhiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr4rNCHbGeaGqk0xh9GrFfpeea0xh9v8qiW7rqqrFfpeea0xe9Lq=Jc9vqaqpepm0xbba9pwe9Q8fs0=yqaqpepae9pg0FirpepeKkFr0xfr=xfr=xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaamyqaiabgkHiTiaadsfacaWGLbGaeyOeI0IaamOqaiaabccadaGdKaWcbaGaeyOeI0IaamivaiaadwgaaeqakiaawkziaiaadgeacqGHsislcaWGcbGaaeiiaiaabccacaqGGaGaaeiiaiaabccacaqGGaGaaeiiaiaabccacaqGGaGaaeiiaiaabwgacaqGXbGaaiOlaiaabccacaqGXaaaaa@4F12@

Insertion reactions are the reverse chemical process where tellurium gets inserted between A and B, to form A-B molecule, as shown in equation 2.

AB  +Te ATeB          eq. 2 MathType@MTEF@5@5@+=feaaguart1ev2aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLnhiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr4rNCHbGeaGqk0xh9GrFfpeea0xh9v8qiW7rqqrFfpeea0xe9Lq=Jc9vqaqpepm0xbba9pwe9Q8fs0=yqaqpepae9pg0FirpepeKkFr0xfr=xfr=xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaamyqaiabgkHiTiaadkeacaqGGaWaa4ajaSqaaiabgUcaRiaadsfacaWGLbaabeGccaGLsgcacaWGbbGaeyOeI0IaamivaiaadwgacqGHsislcaWGcbGaaeiiaiaabccacaqGGaGaaeiiaiaabccacaqGGaGaaeiiaiaabccacaqGGaGaaeiiaiaabwgacaqGXbGaaiOlaiaabccacaqGYaaaaa@4F08@

We introduced one more equation here, in which a reaction of A-Te-B, with C-D forms A-B and C-Te-D by tellurium transfer reaction, as shown in equation 3.

ATeB+CD  Te/+Te AB+CTeD         eq. 3 MathType@MTEF@5@5@+=feaaguart1ev2aaatCvAUfeBSjuyZL2yd9gzLbvyNv2CaerbuLwBLnhiov2DGi1BTfMBaeXatLxBI9gBaerbd9wDYLwzYbItLDharqqtubsr4rNCHbGeaGqk0xh9GrFfpeea0xh9v8qiW7rqqrFfpeea0xe9Lq=Jc9vqaqpepm0xbba9pwe9Q8fs0=yqaqpepae9pg0FirpepeKkFr0xfr=xfr=xb9adbaqaaeGaciGaaiaabeqaamaabaabaaGcbaGaamyqaiabgkHiTiaadsfacaWGLbGaeyOeI0IaamOqaiabgUcaRiaadoeacqGHsislcaWGebGaaeiiamaaoqcaleaacqGHsislcaWGubGaamyzaiaac+cacqGHRaWkcaWGubGaamyzaaqabOGaayPKHaGaamyqaiabgkHiTiaadkeacqGHRaWkcaWGdbGaeyOeI0IaamivaiaadwgacqGHsislcaWGebGaaeiiaiaabccacaqGGaGaaeiiaiaabccacaqGGaGaaeiiaiaabccacaqGGaGaaeyzaiaabghacaGGUaGaaeiiaiaabodaaaa@5B39@

Initially, the synthesis of square-pyramidal triiron clusters [Fe3Te2−(CO)9] (3) was carried by Hieber process by reacting Na2TeO3(1) with Fe(CO)5 (2) in basic methanol solutions, followed by acidification (Scheme 1) [2].

Later the method was modified, and the tellurium and TeO2 were directly used as the source for the synthesis of 16-transition metal carbonyl clusters. In the iron cluster system, TeO2 reaction with iron carbonyl in basic conditions yielded tetrahedral clusters [TeFe3(CO)9]2− (6) (Scheme 2) [3].

Another approach was to use the Zintl ions with metal carbonyls where reductive attack of polychalcogenides on the metal atoms followed by oxidative decarbonylation produced different high nuclearity carbonyl cluster. For example, [(Te2−)4W6(CO)18]2− (9) was formed by the reaction of Na2Te4 (7) and W(CO)6 (8) at 100 °C in DMF solution (Scheme 3). Similarly, Fe(CO)3(4-butadiene) (10) reaction with Na2Te4 produced the butterfly [(Te)Te2−Fe2(CO)6]2− (11) (Scheme 4) [4].

Another approach showed that the reduction of the iron clusters say triiron telluride cluster [Fe3Te2(CO)9] (4) with 2 equiv. of CoCp2 (12) produced larger di-Te2Fe3 cluster which was [Te6Fe8(CO)24]2− (13) (Scheme 5) [5,6].

Other method includes hydro(solvo)thermal conditions by the use of which the oxidative decarbonylation of trinuclear iron cluster took place, for example, Fe3(CO)12 (15) reaction with Na2Te2 (14) in MeOH at 110 °C or water at 130 °C gave the poly-ditelluride-iron clusters which were [(TeMe)2(Te)2(Te2)2Fe4(CO)8]2−(16) and [(Te2−)7Fe6(CO)12]2− (17), respectively (Scheme 6) [7].

The second type of reaction was extrusion reaction where the stepwise cleavage of carbon-tellurium bond took place with the extrusion, which produced different products along with the liberation of tellurium (Scheme 7) [8]. This extrusion can be brought about by thermal treatment or Laser-induced photolysis of 18.

Isotellurazoles (21) exclude tellurium after the addition of acetylenic dienophiles (22) to produce the polysubstituted pyridines (24) (Scheme 8) [9].

It was found that this reaction can only be favourable when at least one substituent on the acetylene was electron withdrawing [9]. Similarly, isotellurazole Te oxides (25) extrudes TeO and Te to form substituted pyridines (27) (Scheme 9) [9].

In another case, replacement of the tellurium atom by oxygen to form 29 was found in the peracid environment in the oxidation of a tellurophene (28) (Scheme 10) [10].

Other examples include the extrusion of tellurium from Bis-aryltelluro-cadmium (30) and Bis-aryltelluro-mercury compounds (Scheme 11) [11].

And, trinuclear metal carbonyl clusters on reaction with benzo[b]tellurophene (34) at higher temperatures afforded product with the expansion in the ring (35) (Scheme 12) [12].

In the above examples, we did not notice that the extruded tellurium atom is utilised by the other reactant, or moieties present in the same reaction medium. We introduce a third type or another type of extrusion reaction called tellurium transfer/extrusion reaction. To support this another kind of reaction, we found the examples where the extruded tellurium atom is utilised by the other simple metal carbonyl present in the reaction medium to produce the metal clusters incorporated with tellurium. Our previous paper presented an interesting Ru4Te2(CO)12 cluster example which was synthesised, by the reaction of Fe3Te2(CO)9 and Ru3(CO)12 in benzene for 5h at reflux (Scheme 13) [13].

Same Ru4Te2−(CO)12 product can be obtained in 40% yield (based on Ru3(CO)12), by the reaction of PhC2TeC2Ph with Ru3(CO)12 along with PhC2C2Ph (76% yield), which shows the transfer of tellurium from PhC2TeC2Ph to Ru4Te2−(CO)12 (Scheme 14).

Further, we performed other reaction of Fe2(CO)9 with PhC2TeC2Ph in thermal reaction conditions and found the earlier synthesised stable Fe3Te2(CO)9 (4) cluster [2] as the product (45% yield based on Fe2(CO)9) with the liberation of PhC2C2Ph (85% yield) (Scheme 15).

We believe and propose that the reaction of PhC2TeC2Ph with the metal carbonyl cluster will produce the more thermodynamically stable metal carbonyl tellurium clusters in thermal reaction conditions [14].

PM gratefully acknowledges the JC Bose National Fellowship. AS acknowledges MHRD, New Delhi, India and IIT Indore.

Electronic Supplementary Information

  1. In PATAI'S Chemistry of Functional Groups. 2009.
  2. Hieber W, Gruber J. Zur Kenntnis der Eisencarbonylchalkogenide. Z Anorg Allg Chem. 1958: 296: 91-103
  3. Bachman RE, Whitmire KH. The Synthesis and Characterization of a Series of Iron Carbonyl Clusters Containing Selenium and Tellurium. Inorg Chem. 1994; 33: 2527-2533.
  4. Eichhorn BW, Haushalter RC, Merola JS. Synthesis, structure, and properties of Fe2Te3(CO)62- containing the unusual µ22-Te2−2- ligand. Inorg Chem. 1990; 29: 728-731.
  5. Shieh M, Chen PF, Tsai YC, Shieh MH, Peng SM, et al. Facile Syntheses and Transformations of a Series of Tellurium-Iron Carbonyl Clusters: Crystal Structures of [PhCH3NMe3]2[Te6Fe8(CO)24], Fe2(CO)6(µ-TeCHCl2)2, and Fe2(CO)6(µ-TeCHPhTe). Inorg Chem. 1995; 34: 2251-2254.
  6. Shieh, M. Recent Developments of Tellurium- and Selenium-Containing Iron Carbonyl Clusters. J Cluster Sci. 1999; 10: 3-36.
  7. Das BK, Kanatzidis MG. Solvothermal synthesis and structure of iron tellurido carbonyl clusters. Polyhedron. 2000; 19: 1995-2002.
  8. Lau P, Braunwarth H, Huttner G, Guenauer D, Evertz K, et al. Oxidative transformation of [RCp(CO)2MnSR].bul. radicals into manganese inidene compounds [RCp(CO)2Mn]2SR+. Organometallics. 1991; 10: 3861-3873.
  9. Eikens W, Jäger S, Jones PG, Thöne C. Organometallic selenolates. Part 2. A new synthesis of dimeric (selenolato) tetracarbonylmanganese (I) complexes. Crystal structures of [Mn(CO)4SeR]2; R = CH2 Ph, C(O) Ph and CO2Me. J Organomet Chem. 1996; 511: 67-75.
  10. Latos-Grażyński L, Pacholska E, Chmielewski PJ, Olmstead MM, Balch AL. Alteration of the Reactivity of a Tellurophene Within a Core-Modified Porphyrin Environment: Synthesis and Oxidation of 21-Telluraporphyrin. Angew Chem Int Ed Engl. 1995; 34: 2252-2254.
  11. Steigerwald ML, Sprinkle CR. Organometallic synthesis of II-VI semiconductors. 1. Formation and decomposition of bis(organotelluro) mercury and bis(organotelluro) cadmium compounds. J Am Chem Soc. 1987; 109: 7200-7201.
  12. Arce AJ, Karam A, De Sanctis Y, Machado R, Capparelli MV, et al. Ring opening and extrusion of tellurium atoms in the reaction of benzo[b]tellurophene with trinuclear iron, ruthenium and osmium clusters: X-ray crystal structures of [Os2(μ-C8H6Te)(CO)10], [Os4(μ-C8H4)(μ3-Te)(CO11], [Ru(μ-C8H6Te)(CO)6)], [Ru43-Te)(μ-C8H6)(CO)11] and [Fe2)μ-C8H6Te(CO)6]. Inorg Chim Acta. 1997; 254: 119-130.
  13. Mathur P, Thimmappa BHS. The synthesis and characterisation of the novel cluster, Ru4Te2−(CO)12. J Organomet Chem. 1989; 365: 363-366.
  14. Singh A, Mathur P. Incorporation of tellurium into metal carbonyl through PhC2TeC2Ph. In preparation.